5
MEG® II Airless Spray Guns with 10 ft Cable
© 2021 Nordson Corporation
Description
See Figure 1.
This manual covers the MEG II reduced cavity and extended spray guns with 10 ft (304
cm) cables. These guns are high-speed airless spray guns used to apply water- and
solvent-based coatings to the interior surfaces of metal cans.
NOTE:
The MEG II guns are approved for solvent-based materials when using approved
drivers. To meet approvals, the fuses and fuse holders supplied with the MEG II guns
must be installed.
The MEG II guns can be used with the iTrax
®
spray system, which offers advanced spray
system control and monitoring.
The MEG II guns feature:
• special internal coil and armature assembly for cooler gun operation
•
online-replaceable gun module (1), consisting of ball, seat, and coil
• online-replaceable ball and seat
•
1/2-20 37 JIC fittings (3) for fluid in and out connections
•
1/4-in. liquid-tight electrical conduit (4) and cable 304-cm (10-ft) long
Two or three MEG II guns can be positioned in a spray pocket for zone-spray
applications. The MEG II guns can be installed on existing spray machine mounting
plates that use these Nordson guns:
• A20A
• A10A
• A14A
Refer to
Specifications
on page 33 for technical data and label information.
IIII 2 G
2 G
Extended Tip Version
Reduced Cavity Version
1
2
3
4
3
Figure 1
MEG II Gun Components (Top View)
1. Gun Module
2. Manifold
3.
1/2-20 37° JIC fittings
4. Electrical conduit and
cable
