Nordson MEG II, Customer Product Manual

Page: 35 / 49

31 MEG® II Airless Spray Guns with 10 ft Cable
© 2021 Nordson Corporation
1602990-12
CleanSleeve Cover
Part Description Note
149237 COVER, CleanSleeve, mini, 500 pieces A, C, D
1618384 KIT, cover, CleanSleeve, MEG gun, slip fit, 12 pieces B, D
NOTE: A. Single-use cover.
B. Reusable cover.
C. Includes a total of 500 CleanSleeve covers, in 20 packs of 25.
D. Works on MEG II reduced cavity spray guns
Nozzle Wrench
Part Description Note
163945 WRENCH, nozzle A
1618632 KIT, wrench, nozzle, multipurpose B
NOTE: A. Used specifically for tapered container nozzles and CleanSpray nozzles.
B. Used for the following nozzles: tapered, cross-cut, minimum cavity, CleanSpray, and short press-in.
Additional features include 5/8-in. (16 mm) width and 3/4-in. (19 mm) width for checking nozzle to can cut edge
distance. Ruler markings included in mm scale to help with additional can dimension setup.
Nozzle Wrench Multipurpose Nozzle Wrench
Figure 11 Nozzle Wrenches
Pressure Transducer
Use this pressure transducer with the iTrax spray monitor system. It has a 10 ft (304 cm)
armored cable from the transducer to the amplifier, and a 8 ft (244 cm) cable from the
amplifier to the spray monitor. Refer to the instruction sheet shipped with the transducer
for specifications.
Part Description Note
1602880 TRANSDUCER, 160F, with integral amplifier, 0-1000 psi