Nordson AltaBlue, Customer Product Manual

Page: 53 / 234

Hardware Installation and Setup
3-22
Part 1120130
E
2011 Nordson Corporation
Setting Up Inputs/Outputs
(contd)
Table
3-2 Input/Output Data
Item
7
Description
Control
Options
Terminals Notes
1 Standard
input 1 Note A -17X21:8,-17X21:9 Input activated with 10 - 30 VDC. The input is not
polarity sensitive.
2 Standard
input 2 Note A -17X21:10,-17X21:11 Input activated with 10 - 30 VDC. The input is not
polarity sensitive.
3 Standard
input 3 Note A -17X21:12,-17X21:13 Input activated with 10 - 30 VDC. The input is not
polarity sensitive.
4 Standard
input 4 Note A -17X21:7,-17X21:14 Input activated with 10 - 30 VDC. The input is not
polarity sensitive.
5 Standard
output 1 Note B -17X21:1,-17X21:2 The output is a electromechanical relay contact
rated for 2 Amps at 240 VAC or 30 VDC.
6 Standard
output 2 Note B -17X21:3,-17X21:4 The output is a electromechanical relay contact
rated for 2 Amps at 240 VAC or 30 VDC.
7 Standard
output 3 Note B -17X21:5,-17X21:6 The output is a electromechanical relay contact
rated for 2 Amps at 240 VAC or 30 VDC.
8 Gear-to-line
0-10V input -17X21:15,-17X21:16 Refer to Setting Up Gear-to-line Operation.
Connect the positive wire to -17X21:15. Connect
the negative wire to -17X21:16. Note that the
negative input is connected to chassis (PE).
9 Pump 1
remote
on/off -17X21:17,-17X21:18 Input activated with 18 - 30 VDC. The input is not
polarity sensitive. Activating the input will turn on
the motor when the remote control feature is
enabled from the user interface.
10 Pump 2
remote
on/off -17X21:19,-17X21:20 Input activated with 18 - 30 VDC. The input is not
polarity sensitive. Activating the input will turn on
the motor when the remote control feature is
enabled from the user interface.
11 Pump 3
remote
on/off -17X21:21,-17X21:22 Input activated with 18 - 30 VDC. The input is not
polarity sensitive. Activating the input will turn on
the motor when the remote control feature is
enabled from the user interface.
12 Pump 4
remote
on/off -17X21:23,-17X21:24 Input activated with 18 - 30 VDC. The input is not
polarity sensitive. Activating the input will turn on
the motor when the remote control feature is
enabled from the user interface.
13 Pump drive
1 running -17X21:25,-17X21:26 Electromechanical relay contact that indicates
motor is running when closed. Contact rated for
1.5 Amps at 240 VAC or 30 VDC.
14 Pump drive
2 running -17X21:27,-17X21:28 Electromechanical relay contact that indicates
motor is running when closed. Contact rated for
1.5 Amps at 240 VAC or 30 VDC.
15 Pump drive
3 running -17X21:29,-17X21:30 Electromechanical relay contact that indicates
motor is running when closed. Contact rated for
1.5 Amps at 240 VAC or 30 VDC.
16 Pump drive
4 running -17X21:31,-17X21:32 Electromechanical relay contact that indicates
motor is running when closed. Contact rated for
1.5 Amps at 240 VAC or 30 VDC.
NOTE A:
Input Options: Standby Control, Heaters On/Off Control, Hose/Applicator On/Off Control
B:
Output Options: Ready, Ready and Pump Running, Fault, Alert, Tank Low