Index
1. Prior to assembling the insert
11
Chimney Draft
11
Shared flue gas system
11
Air Supply
11
2. Technical Information
11
3. Safety distances
12
4. Assembly
12
Assembling and adjusting the legs
12
Air inlet
12
Flue colar
12
Assembling heat shields
13
Multipurpose key
13
Operational control
13
5. Lighting the fire for the first time
13
6. Maintenance
14
Cleaning and inspection
14
Ashes
14
Thermotte™
14
Door and glass
14
7. Warranty
15
8. Advice on lighting a fire
15
Some advice in case of combustion problems 16
IMPORTANT SAFETY PRECAUTIONS!
1. Please follow the installation manual when
connecting your stove / fireplace to the chimney /
flue pipe. If connected differently from instruction
please, consider the heat radiation from the flue
pipe to the surrounding materials.
2. Before use, please carefully read the user manual
and follow the instructions.
3. Integrated or defined convection openings may
never be reduced or partially obstructed. This may
lead to overheating, which again can cause house
fire or serious damage to the product.
4. Use only designated fire starters.
Never use
gasoline, diesel or other liquids to start the fire.
This may cause explosions!
5. Never use other fuel than natural dry chopped
wood. Briquettes, peat, coke, coal and waste
from construction materials develops far higher
temperatures and emissions than natural wood.
Since your product has been designed for use
with natural wood only, other fuels may damage
the product, chimney and surrounding
constructions.
6. In case of damage to glass or door gasket, all use
of the product must be discontinued until the
damage has been repaired.
7. Products connected to a vented steel chimney must
never be operated with open or ajar door other than
reloading of wood or shortly during kindling process.
Failure to follow these precautions will leave your
warranty void and expose people and property to
danger.
Advise:
Even if not required in your area, it is always
wise to have a qualified stove / fireplace fitter do the
installation, or at least the final inspection before use.
10
GB
Summary of Contents for N-21T Exclusive
