49
6.3
Removing and installing parts for maintenance
6.3.1
Removal and installation of the steam cylinder
1. Undo the two screws fixing the front panel to the unit using a screwdriver,
then remove the front panel.
2. Release the hose clamp on the steam hose using a screwdriver, then
detach the steam hose from the steam outlet connection of the steam
cylinder.
3. Remove all plugs from the electrodes and from the level sensor.
4. Loosen the screw of the steam cylinder fixing device by a few turns,
then push the fixing device upwards until it comes loose and remove it.
1
2
3
4
Summary of Contents for es4 4
Page 2: ......
Page 65: ...65 Notes...
Page 66: ...Notes...
Page 67: ...Nordmann Engineering Ltd Printed in Switzerland Technical modifications reserved...
