21
4.3.2
Mounting the humidifier
Procedure
1. Mark the attachment point “A” on the wall.
2. Drill hole for attachment point “A” (diameter: 8 mm, depth: 40 mm).
3. Insert the supplied plastic plug, and tighten the screw until the distance
between the wall and the screw head is 4 mm.
4. Unlock the two screws fixing the front panel to the unit, then remove the
front panel.
5. Hang up the unit onto the screw and adjust it horizontally and vertically
using a spirit level. Then, mark the fixing points “B”.
6. Drill the holes for the fixing points “B” (diameter: 8 mm, depth: 40 mm).
7. Insert the supplied plastic plugs, and tighten the screws until the distance
between the wall and the screw head is 4 mm.
8. Hang the unit up onto the screws. Before tightening the screws, readjust
the unit with the spirit level.
9. Reattach the front panel and secure it with the two screws.
Dimension
Nordmann ES4 4 230V1
a
175 mm
b
35 mm
c
335 mm
d
130 mm
e
75 mm
b
c
a
d
e
Summary of Contents for es4 4
Page 2: ......
Page 65: ...65 Notes...
Page 66: ...Notes...
Page 67: ...Nordmann Engineering Ltd Printed in Switzerland Technical modifications reserved...
