11
12
77
F
15
14
49
50
Avoid pinching
the wires
13
13. Slide the Console Cover (16) upward against the
Handlebar (14). Attach the Console Cover with
two M4 x 16mm Screws (49).
14
49
16
12. While a second person holds the Console (15)
near the Handlebar (14), plug the Main Wire (77)
and the Pulse Wires (50) into the receptacles (F)
on the Console.
The connectors on the Main Wire (77) and
the Pulse Wires (50) should slide easily into
the receptacles (F) and snap into place. If
a connector does not slide easily into a recep-
tacle, turn the connector and try again. If you
do not connect the connectors properly, the
Console (15) may become damaged when
you use the exercise bike.
Then, insert the excess wire into the
Handlebar (14).
Tip: Avoid pinching the wires. Attach the
Console (15) to the Handlebar (14) with four
M4 x 16mm Screws (49); start all the Screws,
and then tighten them.
15
18
17
14. Attach the Tablet Holder (17) to the Console (15)
with four M4 x 12mm Machine Screws (18); start
all the Screws, and then tighten them.
14
