NordicTrack NTRW39121-INT.0, User Manual

Page: 8 / 28

8
5. Slide the Seat (23) to the front of the Rail (2).
Next, attach the Rear Stop (87) to the Rail (2)
with two M4 x 8mm Screws (104).
Then, attach the Rail Cap (38) to the Rail (2)
with two M4 x 19mm Screws (69).
7. While a second person holds the Console (75)
and the Upright (77) near the Frame (1), connect
the Upright Wire (84) to the Main Wire (109).
The wire connectors should slide together
easily and snap into place with an audible
click. If they do not, turn one connector and
try again. Insert the excess wire into the Frame.
Tip: Avoid pinching the wires. Attach
the Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82); start all four Screws,
and then tighten them.
2
5
6
7
38
69
69
87
23
104
105
105
82
77
77
1
84
84
75
75
Avoid pinching
the wire
Avoid
pinching
the wires
109
6. While a second person holds the Console (75)
near the Upright (77), plug the Upright Wire (84)
into the receptacle on the Console. The wire
connector should slide into the receptacle
and snap into place with an audible click. If
it does not, turn the connector and try again.
If you do not connect the connector properly,
the Console may become damaged when you
turn on the console.
Insert the excess wire into the Upright (77) or
into the Console (75).
Tip: Avoid pinching the wires. Attach the
Console (75) to the Upright (77) with four
M4 x 12mm Screws (105); start all four
Screws, and then tighten them.