15
15. Orient the Upright Crossbar (98) as shown.
Carefully slide the Upright Crossbar (98)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar (98) with the four
5/16" x 3/4" Screws (4) that you removed in
step 5; start all four Screws, and then tighten
them.
15
89
98
4
4
90
16
98
10
10
48
17
17. Note: If the treadmill is assembled on a
smooth surface, it may roll forward in this
step.
Remove the two 5/16" x 3/4" Screws (4) from the
Latch Crossbar (41). Note: The Latch Crossbar
is not preattached to the treadmill.
Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 19 is completed.
Orient the Latch Crossbar (41) as shown. Make
sure that the “This side toward belt” sticker
(N) is facing the treadmill. Attach the Latch
Crossbar to the brackets (O) on the Frame (56)
with the two 5/16" x 3/4" Screws (4) that you just
removed and two 5/16" Star Washers (11).
56
41
N
O
O
4
4
11
11
16. Insert the Tray (48) from the front of the treadmill
and set it on the Upright Crossbar (98) as
shown.
Attach the Tray (48) to the Upright Crossbar (98)
with four #8 x 1/2" Screws (10); start all four
Screws, and then tighten them.
Summary of Contents for NTL89522C.1
Page 5: ...5 ...