26
Press the RESET button again and delete or
add TV channels.
After all valid TV channels have been stored in the
console’s memory, you can delete unwanted chan-
nels or add other channels. To delete or add a
channel, first press the C or – button
until the channel number appears in the main dis-
play.
Next, press the + or – button above the ENTER
AGE/WT button until the word DELETED (to delete
the channel) or SAVED (to add the channel) ap-
pear in the main display. Then, select the next
channel that you want to delete or add. Repeat this
process until you have finished deleting or adding
channels.
When you are finished changing television
settings, hold down the C and – but-
tons for a few seconds.
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total distance that the walking
belt has moved. The information mode also allows you
to switch the console from miles per hour to kilometers
per hour. In addition, the information mode allows you
to turn on and turn off the demo mode.
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the main display will
show the following information:
The left side of the main
display will show the total
number of hours that the
treadmill has been used.
The center of the main
display will show the total
distance that the walking belt
has moved.
The right side of the main dis-
play will show an E for
English miles or an M for
metric kilometers. Press the
SPEED + button to change
the unit of measurement if
desired.
IMPORTANT: Make sure
that there is not a letter D in
the main display.
If a D ap-
pears, the console is in the
“demo” mode. This mode is
intended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence; the buttons on
the console will not operate.
If a D appears in the main
display when the information mode is selected,
press the SPEED – button so the D disappears.
To exit the information mode, remove the key from the
console.
9
8
