9
6. Set the Console Cover (87) on the Uprights (77,
79). Make sure that the Console Cover is ori-
ented with the ties toward the bottom as shown.
Attach the Console Cover (87) with the two #8 x
1 1/2" Screws (104) that you removed in step 4.
Start both Screws before tightening either of
them. Do not overtighten the Screws.
Insert the Upright Wire (78) through the loops in
the ties.
6
Ties
87
79
104
78
77
7. Identify the Left and Right Pulse Handrails (86,
102).
Hold the Left Pulse Handrail (86) near a
Handrail (88). Insert the Left Pulse Wire (90)
into the top of the Handrail and pull it out of the
indicated hole. Slide the Left Pulse Handrail into
the Handrail.
Be careful not to pinch the Left
Pulse Wire.
Attach the Left Pulse Handrail (86) to the
Handrail (88) with two 5/16" x 1 3/8" Bolts (3)
and two 5/16" Star Washers (9).
Note: See the
inset drawing. Use the two indicated bolt
holes.
Attach the Right Pulse Handrail (102) to the
other Handrail (88) in the same way.
9
3
3
90
Hole
88
91
9
86
102
Hole
88
7
86
90
88
Bolt
Holes