HOW TO MOVE THE INCLINE TRAINER
Before moving the incline trainer, insert the key into the
console, raise the incline to the maximum incline level,
remove the key, and unplug the power cord.
Due to the size and weight of the incline trainer, moving
it requires two or three persons.
Hold the upright firmly
near the console. Tip the incline trainer back until it rolls
freely on the wheels.
CAUTION: To decrease the possibil-
ity of injury or of damage to the incline trainer, do not
lift the incline trainer by the plastic belly pan. Do not
pull on the console.
Carefully roll the incline trainer on the
wheels to the desired location and then lower it to the level
position.
CAUTION: To reduce the risk of injury, use ex-
treme caution while moving the incline trainer. Do not
attempt to move the incline trainer over uneven sur-
faces.
12
Wheel
Upright
Belly
Pan
Console
12. Press the Left and Right Accessory Trays (99,
100) into the Console Cover (87).
Slide the two Handrail Covers (76) down against
the Handrails (88).
12
100
99
76
88
88
76
87
13.
Make sure that all parts are properly tightened before you use the incline trainer.
Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 23 and 24).
To pro-
tect the floor or carpet from damage, place a mat under the incline trainer.