21
5. Log in to your iFit Live account.
Enter your user name and password using the key-
board on the screen. To use numbers or other
characters, press the .?123 button or the #+- but-
ton. To return to the letter keyboard, press the ABC
button. To capitalize a character, press the button
with an upward-facing arrow. To clear the last
character, press the button with a backward-facing
arrow and an X. To return to the main menu, press
the Cancel button. When you are finished, press
the Login button.
To set up an iFit Live account, or for more informa-
tion on the account, go to www.iFit.com.
6. View the unit of measurement.
Press the US/Metric button to view the selected
unit of measurement. To change the unit of mea-
surement, select the desired unit of measurement.
When you are finished, press the Back button.
7. Turn on or turn off the display demo mode.
The console features a display demo mode, de-
signed to be used if the incline trainer is displayed
in a store. While the demo mode is turned on, the
console will function normally when you plug in the
power cord, switch the reset/off circuit breaker to
the reset position, and insert the key into the con-
sole. However, when you remove the key, the dis-
plays will remain lit, although the buttons will not
function.
To turn on or turn off the display demo mode,
press the Demo Mode button. Select the desired
setting and press the Back button.
8. Exit the settings mode.
To exit the settings mode, press the Back button.
HOW TO USE THE CALIBRATION MODE
The console features a calibration mode that allows
you to calibrate the incline and speed of the incline
trainer and to update the console software.
1. Select the settings mode.
Insert the key into the console (see step 1 on page
15). Select the main menu (see step 2 on page
15). Then, press the i button in the lower right cor-
ner of the screen to select the settings mode.
2. Select the calibration mode.
Press the Calibration
button in the lower right
corner of the screen to
enter the calibration
mode.
3. Calibrate the incline of the incline trainer.
Press the Calibrate Incline button. The incline
trainer will automatically rise to the maximum in-
cline level, lower to the minimum incline level and
then return to the starting position. This will recali-
brate the incline system. When the incline is cali-
brated, press the Back button.
4. Calibrate the speed of the incline trainer.
You should calibrate the speed of the incline
trainer only when instructed to do so by an autho-
rized service representative.
5. Update the console software.
For best results, regularly check for software up-
dates.
Press the Update Firmware button. Numbers will
appear in the grey box on your screen. When the
update is complete, the words PLEASE CYCLE
POWER TO INSTALL UPDATES will appear in the
grey box. Switch the reset/off circuit breaker to the
off position. Wait several seconds and then switch
the circuit breaker to the reset position.
6. Exit the calibration mode.
To exit the calibration mode, press the Back button
repeatedly.