15
HOW TO TURN ON THE POWER
IMPORTANT: If the incline trainer has been
exposed to cold temperatures, allow it to warm to
room temperature before you turn on the power. If
you do not do this, you may damage the console
display or other electrical components.
Plug in the power cord (see
page 13). Next, locate the
power switch on the incline
trainer frame near the power
cord. Make sure that the
switch is in the reset position.
IMPORTANT: The console features a display demo
mode, designed to be used if the incline trainer is
displayed in a store. If the displays light as soon
as you plug in the power cord and press the power
switch into the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see HOW TO CHANGE CONSOLE
SETTINGS on page 20 to turn off the demo mode.
Next, stand on the
foot rails of the incline
trainer. Locate the clip
attached to the key, and
slide the clip securely
onto the waistband of
your clothes. Then,
insert the key into
the console. After a
moment, the displays
will light. IMPORTANT: In an emergency, the key can
be pulled from the console, causing the walking
belt to slow to a stop. Test the clip by carefully tak-
ing a few steps backward; if the key is not pulled
from the console, adjust the position of the clip.
Note: The first time you insert the key into the console,
the incline may automatically rise to the maximum
incline level and then return to the minimum incline
level. This will calibrate the incline of the incline trainer.
If the incline does not automatically change, see step
4 at the right.
HOW TO SET UP THE CONSOLE
Before using the incline trainer for the first time, set up
the console.
1. Create an iFit Live account.
To create an iFit Live account, or for more informa-
tion about the account, go to www.iFit.com and
click Register.
Select either the basic plan or the limitless plan.
Note: For more information, read the details under
each plan. If you have an activation code, select
the limitless plan. Then, follow the prompts to sign
up for your iFit plan.
2. Connect to your wireless network.
Note: In order to download iFit Live workouts and
use several other features of the console, you must
be connected to a wireless network. See HOW TO
CHANGE CONSOLE SETTINGS on page 20 to
connect the console to your wireless network.
3. Check for firmware updates.
See HOW TO CHANGE CONSOLE SETTINGS on
page 20 and check for firmware updates.
4. Calibrate the incline.
See the troubleshooting symptom “The incline of
the incline trainer does not change correctly” on
page 25 and calibrate the incline of the incline
trainer if necessary.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 16. To use an
onboard workout, see page 18. To use an iFit Live
workout, see page 19. To change console settings,
see page 20. To use the stereo sound system, see
page 22.
Reset
ETNT15010
(NTL15010)
Key
Clip