9
7. Apply a small amount of grease to the axle of
the left Pedal Arm Bracket (43).
Attach the left Pedal Leg (8) to the left Pedal
Arm Bracket (43) with two M10 x 19mm Patch
Screws (61) and two M10 Split Washers (79).
Attach the right Pedal Leg (8) in the same
way.
7
43
79
8
61
Grease
8
8.
Tip: Avoid pinching the Upper Wire Harness
(81).
Attach the Handlebar (90) to the Upright
(2) with four M6 x 32mm Patch Screws (96).
8
2
81
90
96
96
9. While a second person holds the Console (3)
near the Upright (2), connect the three wires on
the Console to the Upper Wire Harness (81), to
the Pulse Wire (92), and to the Ground Wire
(97). Insert the excess wire into the Upright.
Tip: Avoid pinching the wires. See the inset
drawing.
Attach the Console (3) to the Upright
(2) with four M4 x 16mm Screws (67).
9
3
3
2
Avoid pinching
the wires
2
97
81
Wires
92
67
