8
5
5.
Tip: Avoid pinching the wires. Avoid damag-
ing the indicated plastic tabs.
Set the Upright
(4) on the Frame (1).
Attach the Upright (4) with four M10 x 25mm
Screws (99) and four M10 Split Washers (105).
Do not fully tighten the Screws yet.
Avoid pinching the
wires and avoid
damaging the tabs
Tabs
4
1
105
105
99
99
6
6.
See the inset drawing.
Locate the wire tie in the
lower end of the Upright (4). Tie the wire tie to
the Upper Wire (110) and to the Fan Extension
Wire (146). Then, pull the upper end of the wire
tie until the Upper Wire and the Fan Extension
Wire are routed through the Upright.
Tip: To prevent the wires from falling into the
Upright (4), secure the wires with the wire tie
.
4
110
Wire
Tie
Wire Tie
110
146
146
146
110
