7
3. Orient the Upright (5) and the Top Cover (27) as
shown, and slide the Top Cover upward onto
the Upright.
Have a second person hold the Upright (5) and
the Top Cover (27) near the Main Frame (1).
Locate the wire tie in the Upright (5). Tie the
lower end of the wire tie to the Wire Harness
(60). Next, pull the upper end of the wire tie
until the Wire Harness is routed completely
through the Upright.
Tip: To prevent the Wire Harness (60) from
falling into the Upright (5), secure the Wire
Harness with the wire tie.
4. Note: For clarity, the Top Cover (27) is not
shown in this step.
Tip: Avoid pinching the Wire Harness (60).
Slide the Upright (5) onto the Main Frame (1).
Attach the Upright (5) with four M8 x 16mm
Patch Screws (102) and four M8 Split Washers
(103);
do not tighten the Patch Screws yet.
See the inset drawing.
Slide the Top Cover
(27) downward;
do not press the Top Cover
onto the Frame Covers (21, 22) yet.
3
Wire Tie
Wire Tie
5
27
60
1
4
5
103
103
102
102
102
22
21
27
Avoid pinching the
Wire Harness (60)
60
1
