7
4. While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).
Then, insert the Upright (10) into the Frame (1).
Tip: Avoid pinching the Wire Harnesses (64,
65).
Attach the Upright (10) with four M8 x
19mm Button Screws (85) and four M8 Split
Washers (97).
Do not tighten the Button
Screws yet.
10
1
97
97
97
97
85
85
65
64
4
Avoid pinching the
Wire Harnesses (64, 65)
5. Orient the Left and Right Upright Covers (19,
20) as shown.
Attach the Upright Covers (19, 20) around the
Upright (10) with five M4 x 16mm Round Head
Screws (80).
5
19
20
10
80
80
80
