Nordica MILLY UL-C, Installation And Operating Instructions Manual

Page: 28 / 80

007098005-001
7.0 MAINTENANCE AND CARE
AlwAys follow ThE INsTRuCTIoNs IN CoMplETE sAfETy!
Š Make sure that the power cord is unplugged (if present).
Š
that the generator is cold all over.
Š
the ashes are coMpletely cold.
Š
ensure efficient air exchange in the rooM during the product cleaning operations.
Š poor cleaning will coMproMise correct operation and safety!
7.1 pERIoDIC MAINTENANCE uNDER usER’s REspoNsIbIlITy
the periodic maintenance, as indicated in this installation and operating instruction, must be performed with the utmost care after
reading the instructions, procedures and frequency described in this manual.
check the external air intake, by cleaning it, at least once a year. the flue must be regularly swept by the chimney sweeper.
let your chimney sweeper in charge of your area check the regular installation of the device, the connection to the flue and the
aeration. refer to the chapter “3.2.2 chiMney and chiMney connector Maintenance” about the potential formation of creosote
in the chimney and chimney connector.
wARNING
THE MAINTENANCE AND CARE MUST BE CARRIED OUT ONLY WITH COLD DEVICE.
YOU SHOULD ONLY USE SPARE PARTS APPROVED AND SUPPLIED BY LA NORDICA S.P.A. PLEASE CONTACT YOUR
SPECIALIZED RETAILER IF YOU REQUIRE SPARE PARTS. YOU MUST NOT MAKE ANY CHANGES TO THE DEVICE!!!
wARNING
THE CLEANING OF GLASS MUST BE CARRIED OUT ONLY AND EXCLUSIVELY WITH COLD DEVICE TO AVOID THE
EXPLOSION OF THE SAME GLASS.
FOR THE CLEANING, IT IS POSSIBLE TO USE SPECIFIC PRODUCTS OR A WET NEWSPAPER PAPER BALL PASSED IN THE ASH
TO RUB IT. DO NOT USE CLOTHS, ABRASIVE OR CHEMICALLY AGGRESSIVE PRODUCTS BY CLEANING THE HEARTH GLASS
7.1.1 GlAss ClEANING
thanks to a specific inlet of secondary air, the accumulation of dirty sediments on the glass-door is reduced with efficacy.
nevertheless this can never be avoided by using solid fuels ( particularly wet wood ) and it has not to be understood as a defect of the
appliance.
the correct ignition phase, the use of proper quantities and types of fuels, the correct position of the secondary air regulator, enough
draught of the chimney-flue and the presence of combustion air are the essential elements for the optimal functioning of the appliance
and for the cleaning of the glass.
28