background image

www.quadrafi re.com

7033-277N

August 3, 2015

 WARNING

If the information in these instruc-
tions is not followed exactly, a 
fi re may result causing property 
damage, personal injury, or death.

 

•  Do not store or use gasoline or other fl am-

mable vapors and liquids in the vicinity of 
this or any other appliance.

•  Do not overfi re - If heater or chimney con-

nector glows, you are overfi ring. Overfi ring 
will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specifi ed.  Failure to 
comply may cause house fi re.

Installation and service of this appliance should 
be performed by qualifi ed personnel.  Hearth & 
Home Technologies recommends NFI certifi ed 
professionals, or technicians supervised by an NFI 
certifi ed professional.

WARNING

Hot glass will cause burns.

•  Do not touch glass until it is cooled
•  NEVER allow children to touch glass
•  Keep children away
•  CAREFULLY SUPERVISE children in same 

room as fi replace.

•  Alert children and adults to hazards of high 

temperatures.

High temperatures may ignite clothing or 
other fl ammable materials.

•  Keep clothing, furniture, draperies and other 

fl ammable materials away.

HOT SURFACES!

Glass and other surfaces are 
hot during operation AND cool 
down.

NOTE

To obtain a French translation of this manual, please contact 
your dealer or visit www.quadrafi re.com

00

Pour obtenir une traduction française de ce manuel, s’il vous 
plaît contacter votre revendeur ou visitez www.quadrafi re.com

WARNING

Fire Risk.

For use with solid wood fuel only.
Other fuels may overfi re and generate poisonous 
gases (i.e. carbon monoxide).

3100 WOOD STOVE SERIES

Automatic Combustion Control (ACC)

Owner’s Manual

Installation and Operation

MODELS: 

31M-ACC-MBK             31ST-ACC            31M-ACC-LE

      Millennium Model

        

 

Step Top Uni-Body Model        

   Limited Edition

(Pedestal Model Shown)

O-T L

Tested and 

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

C

US

Summary of Contents for Millennium 31M-ACC-MBK

























































Reviews: