10. SYSTEM SETTINGS
|
31
System Menu
The System Menu is used for editing system specific set-
tings in the
Lcd WindOW
. You access it by pressing the
sYsteM
button (
shift + sLOt a
).
Use the
•
PrOGraM
buttons to change page.
Hold a
F
PrOGraM
button pressed down to scroll
quickly.
Use the
•
Lcd-diaL
to change setting.
Transpose
default value:
0
-6
-
+6
Transposes the keyboard in steps of 1
semi note
.
Fine tune
default value:
0
-50
- +
50
Fine tunes both Synth Panels in steps
of 1 Cent.
Sustain Pedal Polarity
default value:
Closed
Open
Open polarity; for use with a pedal
with open polarity
.
Closed
Closed polarity; for use with a pedal
with closed polarity
.
Control Pedal Type
default value:
Roland
here you can match the control pedal characteristics for
various manufacturers.
ROLAND
Yamaha
ERNIE BALL
FATAR
If the manufacturer of your pedal is not listed above,
F
you can try operating the pedal to it’s end positions.
The pedal range is briefly shown in the
Lcd WindOW
as a value between 0 and 100. Select the setting that
best matches the range of your pedal.
Control Pedal Destination
default value:
MORPH
Controls the destination for the Control Pedal input.
VOLUME
Used to controll the overall volume
.
MORPH
Used as a Morph source.
.
Display Mode Hold
default value:
OFF
determens for how long a parameter setting is shown in
the
Lcd WindOW
when editing a program.
ON
Parameters are shown indefinatley
.
OFF
Parameters are shown breifly
.
Memory Protect
default value:
On
On
Store function disabled.
Off
Store function enabled
.
10.
System settings
