By selecting "Company Name" (figure 6), a keyboard
appears on the display which you can use to type the
name, when finished, press "enter" to confirm, or "Esc"
to exit.
After turning on the main blast chiller switch, the
display lights up. Wait a few minutes for the software to
load, until the screen in Fig. 5 appears.
Then set all the required data.
50
INDUSTRY
5.1.1 Entering the company name
By selecting "Time zone", the screen shown in fig. 7
appears and you can choose the country in which the
blast chiller is used.
5.1.2 Setting the time zone
Section 5
Instructions for use
figure 6
figure 7
figure 5
5.1 First start-up
1)
2)
3)
4)
6)
5)
