6
6
#
7 ' 3/
names (for example, PUBS_PSERVER). At the printer control
panel only, a space must be used following the last character of
the print server name to end the name. For example, the print
server name
FIRSTGROUP_GROUPS_BLUE_TEAM_TEAMS_CRC_QMS
is 42 characters long, and must be entered as follows:
PSERVER NAME[1]
FIRST_GROUP_GROU
PSERVER NAME[2]
PS_BLUE_TEAM_TEA
PSERVER NAME[3]
MS_CRC_QMS<space>
where <space> is the space character.
4
Reset the CrownNet interface by using the Administration/
Communications/Resident NIC/CrownNet/Common/Soft
Reset menu.
5
You’re now ready to print.
From this point, you’ll probably perform most printing tasks from
your application. For specific information, check the printing sec-
tion in your application documentation.
For information on print media types and sizes, see chapter 2,
“Print Media,” in the
Reference manual
.
)'312$* *!
Unless you want to use the default settings, use the following proce-
dure to name the file and print servers. These names must be unique.
»
Note:
In CrownAdmin, the printer shows up as
QMS-xxxx-Print-
System-hardwareaddress
, where
xxxx
is the printer model
number and
hardwareaddress
is the printer’s hardware address as
found on the printer startup page.
1
In the Administration/Communications/Resident NIC/Crown-
Net/NetWare/Config PServer/PServer Context[1], PServer
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
