-
6 3
Then do the following:
1
From Page Setup dialog box of the Photoshop application,
select Screens.
2
Then click the Use Printer’s Default Screen box to enable it.
In addition, RGB graphics created in Photoshop 2.5 and later include
data called RGB tags, which causes Photoshop to use its own algo-
rithms when converting RGB data to CMYK for separations. Unless
these tags are disabled (possible in all versions except 3.01), Photo-
shop converts all RGB data to CMYK rather than letting the printer
perform the conversion. Use the following procedure to disable RGB
tags in Photoshop for Windows. (RGB tags are disabled by default in
Photoshop for Macintosh.)
1
Make a backup copy of the Photoshp.ini (Photoshop 2.5x) or
Photos30.ini (Photoshop 3.0 and later) initialization file.
2
Using a text editor, open the original initialization file.
3
In the [Photoshop] section of the initialization file, add the
following line:
Disablergbtags=1
4
Save the initialization file (in text-only format).
5
Restart Photoshop.
,+-".(.$
Follow this procedure to install the PDF. See your QuarkXPress docu-
mentation for detailed information on installing PDFs.
»
Note:
All PDFs are copied into a PDF subdirectory during the QMS
Level 2 Windows Driver installation process.
»
Note:
Quark 4.00 uses PDFs or PPDs.
1
After you install the QMS driver for Windows, close the
QuarkXPress application on your computer.
2
Copy the QuarkXPress PDF from its installation directory to
the QuarkXPress directory on your computer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
