w w w . h a w k e y e e l e c t r o n i c s . c o m
4.
The display will return to the normal operation mode automatically after five seconds.
SETTING THE DEPTH ALARM
The alarm function can be set for depths ranging from 2 to 10 feet and triggers
an Audible and LCD Icon Alarm when the depth is less than the setting.
To set the SHALLOW ALARM:
1. Press and release the button located on the
front of the D11S display. The current alarm
setting will be displayed on the display. "0" is
the default setting and will turn the alarm
“OFF”.
2. Pressing the key will increase the selected
value. When the setting reaches “10”, the next
key pressed will reset the alarm to “0”.
3. After your selection is made, the display will
return to normal operation after 5 seconds.
N
OTICE
:
To turn the alarm OFF, the alarm should be set to “0”.
When triggered, the audible alarm sounds for 10 seconds while the "
" icon
flashes on the display. After 10 seconds, the audible alarm mutes and the "
"
icon continues to blink until the depth increases or the alarm is reset. To reset the
alarm repeat steps 1 thru 3.
TRANSOM MOUNTING THE TRANSDUCER
I
MPORTANT
:
Transom mounting the transducer is suitable for most
vessels and generally offers the best performance. If you
decide to glue the transducer in-hull, you MUST test the
location on water prior to permanently affixing it to the hull.
If you cannot obtain satisfactory readings during on water testing you
will need to transom mount the transducer, or switch to a custom
transducer. If you have determined that you are going to try to glue
the transducer in-hull, please skip to the next section.
