w w w . h a w k e y e e l e c t r o n i c s . c o m
PARTS SUPPLIED IN PACKAGING
The following parts should be included with the display:
•
Digital Depth Sounder Display
•
White and Black Faces and Bezels (optional on some models, see package
for details)
•
Display Sun Cover (optional on some models, see package for details)
•
Thick Dash Extension Rod (optional on some models, see package for
details)
•
Flush Mount Bracket and Hardware
•
Display Power Harness and Waterproof Fuse Holder Attached to the Unit
•
Air Temperature Sensor and Harness Connected to the Display
The following parts should be included with the transducer:
•
Thru-Hull Transducer with Integrated Temperature Sensor, 30 ft Cable and
Connectors
•
Rubber Gasket
•
Plastic Nut
•
Integrated Temperature Sensor
If any items are missing or damaged, please contact our customer service
department.
SELECTING THE PROPER TRANSDUCER INSTALLATION
The D10DX is available with either a Transom Mount
(D10DX.01T)
or a Plastic
Thru Hull
(D10DX.06T)
Transducer. This package includes a plastic Thru-Hull
Transducer that can ONLY be thru hull mounted and requires a hole to be drilled
in the bottom of your boat. .
The Thru Hull Transducer (D10DX.06T) is suitable for the following vessels:
•
Outboard, inboard/outboard, single or dual inboard, or jet-drive propulsion.
•
Hull dead rise angle below 20°.
•
Fiberglass or Metal Hull Material. CANNOT be constructed of wood.
•
Hull thickness LESS than 1.25” (32 mm)
The Transom Mount transducer (D10DX.01T) is suitable for the following
vessels:
•
Outboard, inboard/outboard, single inboard, or jet-drive propulsion.
•
Hull dead rise angle below 30°.
•
Transom angle from 3-20°.
If you think that the thru-hull transducer is not suitable for your installation, return
to the place of purchase and exchange for the transom mount
(D10DX.01T).
You can also visit our Customer Service Center at www.hawkeyelectronics.com
