background image

w w w . h a w k e y e e l e c t r o n i c s . c o m  

 

CARE AND MAINTENANCE 

Aquatic growth can accumulate rapidly on the transducer’s surface.  This will 
greatly reduce its performance. If you notice a degradation in performance of 
your depth sounder, you may need to clean the transducer. 

 

Clean minor marine growth from the surface with a soft cloth and mild 
household detergent.  

 

Clean severe marine growth with a stiff brush or putty knife.  Be careful to 
avoid making scratches on the surface. Wet sanding can be done with fine 
grade wet/dry paper.

 

 

TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS 

24-Hour Technical Support is available online at hawkeyeelectronics.com. 

 

Search our online Knowledgebase for the latest troubleshooting and FAQ’s, or 
post your own question for our support staff.  For one-on-one support please 
email [email protected].    

 

I

NFORMATION

If you have questions about this 
device please visit our Customer 
Service Center on our website or

 

call us toll free at 888-766-7276.

 

Warranty Details 

• 

Warranty Registration 

Troubleshooting 

• 

Product Knowledgebase 

Product Specifications 

• 

Parts & Accessories 

www.hawkeyeelectronics.com 

 

REPLACEMENT PARTS 

Individual components are not available for sale on our website.  If you need 
replacement parts, please email or call our customer service department. 

 

WARRANTY 

This device is covered by a 2 Year Limited Warranty.  To be eligible for warranty 
coverage, you must register your product within 15 days of purchase.  Visit our 
website for warranty details and to register.   

 

To Activate Your Warranty: 

 

Read and print out a copy of the warranty details for your records. 

 

Complete the registration form our website.  

Summary of Contents for D10DX.06T



















Reviews: