norbar PneuTorque PTS-52-500, Operator'S Manual

Page: 23 / 30

21
Front Exhaust Silencer Replacement (#19324):
TIP: When removing the gearbox take great care not to allow ingress of dirt or debris. This
procedure should only be performed in a clean workshop environment.
1. Remove 5 x M4 Screw (A) (part number 25351.12).
2. Remove the gearbox / front-plate (B) from the handle.
3. Remove 2 x silencers (C) (part number 19324) from the front plate – push out from the front.
4. Insert new silencers (C) (part number 19324) into the front plate. Ensure they are fully inserted and sit
level with (or below) the surface.
5. Reassemble the gearbox / front-plate (B) to the handle, taking care to align the holes with corresponding
dowels.
6. Fit 5 x M4 Screw into front plate and tighten between 3 N·m to 3.5 N·m
FIGURE 14 – Front Exhaust
Silencer Replacement
A (x5)
B
C (x2)