16
Menu
This menu is used to set or view the mode, units, lock, fan, contrast, temperature and software.
To enter the menu press
(DOWN) and
(UP) buttons at the same time.
If
appears enter PIN code.
FIGURE 21 –
Menu
Use
&
to select. Use
to accept.
Menu Option
Details
ANGLE
Select
for torque mode (no angle).
Select
for angle mode.
UNITS
Select N·m or lbf·ft.
LOCK
Select unlock
or lock
The existing code is shown “PIN = 5000”, set 0000 to 9999.
TIP: Keep a note of the pin code in a safe place
In use a wrong PIN shows
& correct PIN shows
EXIT
Exit from menu.
FAN TEST
Press and hold
or
to test fan.
CONTRAST
Adjust as required.
SOFTWARE
“M=30.xxx” = Motor software version and
“D=31.xxx” = Display software version.
NOTE: If the ANGLE mode has been changed, on exit the display will be in “SET” to confirm the
target.
DOWN
UP
ACCEPT
Settings
X
ANGLE
UNITS
LOCK
EXIT
Settings
X
CONTRAST
SOFTWARE
FAN TEST
Summary of Contents for EvoTorque ET-119-6000-110
Page 1: ...OPERATOR S MANUAL EVOTORQUE Part Number 34373 Issue 4 Original Instructions English...
Page 2: ......
Page 26: ...24...
