BioMonitor SmartLead
P852 Rev B (April 2019)
7
6.5 Companion Software Installation
The Ultium BioMonitor SmartLead is compatible with several different software programs. Identify
the companion software that accompanied the equipment (MR3) and follow the appropriate
instructions given next.
MR3 Installation
1.
Insert the MR3 feature map into the PC
2.
A menu will automatically pop up
3.
Click on “Install MR3” and follow the Wizard’s instructions
4.
Double click
on the icon to start the MR3 software.
6.6 Companion Software Configuration
Before the Ultium BioMonitor can be used with the Noraxon Ultium system, the companion
software must be configured to recognize the different components that make up the system.
Refer to the Ultium
system’s hardware manual for instructions for the program (MR3
myoMUSCLE) supplied with the Noraxon system. For specific settings for the Ultium BioMonitor
SmartLead see below:
When assigned to a channel using the serial number, the software should automatically detect
the sensor as an Ultium BioMonitor SmartLead:
