BioMonitor SmartLead
P852 Rev B (April 2019)
8
6.6.1 MR3 Configuration
Step 1
Enter the Hardware Setup
screen and setup the
Noraxon EMG system in
accordance with its
provided hardware manual.
Step 2
Click ‘Detect Sensors in
Charger’ (All sensors
which you would like to
use must be in the charger)
– this will add the
SmartLead(s) to the list of
sensors (only if the unique
SmartLead is connected to
their corresponding sensor).
If the unique SmartLead
(ex: BioMonitor) is not
connected to the
corresponding sensor
during detection, MR3 will
assume you are using the
sensor to collect EMG data.
Click OK.