N O R A B O D E O X Y J E T G O O P E R A T I N G M A N U A L
Preparing the OXYJET GO treatment
Take your OXYJET GO device, storage unit and power adapter out of the packaging.
Please note that the device may not be used in a wet environment, e. g. near a filled
sink, a filled bathtub, a running shower or a filled swimming pool. Do not allow the
device and the power adapter to get wet. Only use the device in a well-lit, dry place
with a mirror.
You will find a total of 5 AC adapters (EU, CN, AU, UK, US) in the outer packaging
of the power adapter that allow you to use the OXYJET GO device in many countries
around the world (for more information, see the enclosed data sheet for the power
adapter).
Keep the AC adapters, as well as the plug-in power adapter, de-energized before
complete assembly!
First select the appropriate AC adapter for your country
(for example, the Euro adapter for use in Germany).
Slide the appropriate AC adapter onto the power adapter from above until it snaps
into place. Pay attention to the correct and tight fit of the adapter.
Note: To change the AC adapter, press ”PUSH“ on the power adapter and pull
the AC adapter upwards. Always disconnect the power adapter from the mains
before replacing or removing the AC adapter!
Now connect the DC plug of the power adapter to the DC device socket on the
bottom of the device. Make sure the plug is correctly seated in the appliance socket.
Now place the device into the storage station, and then plug the power adapter
into a socket.
The ”On/Off“ button now lights up red in the control panel –
the device is in sleep mode.
4.1. Commissioning of the device
4
PREPARING
the OXYJET GO treatment
The device in sleep mode
20
21
