4
NookBox
Installation Guide
Room Sensor
Features
Temperature and Humidity Detection
• The device will transmit temperature and humidity signals regularly according to setting. The factory default interval is 10 minutes.
• When the temperature changes by +/- 2°C, or humidity c/- 10%,the Temperature Sensor will also transmit a signal.
• The change level required to trigger signal transmission is programmable using ZigBee Configure Reporting command
– Reportable Change parameter. The default values are:
Temperature: 200 for 2°C.
Humidity: 1000 for 10%.
• You can also press the Function Button once to transmit a temperature and humidity signal manually.
• The temperature detection range is about -10°C ~ 50°C.( 14°F ~ 122°F)
• The humidity detection range is about 10% ~ 90% RH
Battery and Low Battery Detection
• The Temperature Sensor uses two 1.5 V Alkaline batteries as its power source. The batteries are included in the package.
• The Temperature Sensor feature Low Battery Detection function. When the battery voltage is low, the Temperature Sensor will transmit
Low Battery signal to notify the user and display low battery icon on LCD.
• When changing batteries, after removing the old batteries, press the Function Button twice to fully discharge before inserting
new batteries.
Supervision
The Temperature Sensor will transmit a supervision signal along with the temperature and humidity signal to report its condition regularly.
The factory default interval is 10 minutes, which can be adjusted according to setting.
