6
NookBox
Installation Guide
Room Sensor
Installation
Mounting the Temperatue Sensor
For best LCD display quality, the Temperature Sensor should be mounted at location about 50 above eye level height.
Screw mounting
When mounting with screw, make sure to only use screws provided in the package by original manufacturer,
as inappropriate screws may damage interior of the device.
1. Remove the front cover by using a screwdriver.
2. Break through the knockouts on the back cover.
3. Using the holes as a template, drill holes in the surface.
4. Insert the wall plugs if fixing into plaster or brick.
5. Screw the back cover into the wall plugs.
6. Screw the front cover back on to the back cover.
Using Temperature Sensor with ZigBee Router
IMPORTANT NOTE
If the Temperature Sensor installation location is away from your system control panel and requires ZigBee routers to improve signal strength.
DO NOT
use a ZigBee Router without backup battery. A ZigBee router without battery will be powered down during AC power failure
and the Room sensor connected to the router will lose connection with ZigBee network. You should plan your Room sensor installation
location using only ZigBee router with backup battery.
