3
NookBox
Installation Guide
PSD-29ZBS(R) / PSMD-29ZBS(R) Power Switch Dimmer Series
Parts Identification
1. Function Button aka LED indicator
The Function Button also doubles as the LED Indicator.
The function button is used to control the Dimmer.
The LED indicator is used to indicate Dimmer status.
LED Indication:
The LED indicator lights up in the following conditions:
• On:
The Dimmer is turned on.
• Off:
The Dimmer is turned off.
• Flashes twice:
The Dimmer has successfully joined a ZigBee network.
• Flashes 5 times:
The Dimmer has successfully bound with a controller
• Flashes once every 20 minutes:
The Dimmer has lost connection to its current ZigBee network.
(PSD-29ZBS and PSMD-29ZBS only)
Function Button Usage:
• Press the button to increase power output level:
(0%→10%→20%→30%→…..→ 100%→0%...)
• Press and hold the button for 10 seconds then release to reset the Dimmer.
• Press and hold the button for 3 seconds then release to bind with a controller
