7
NookBox
Installation Guide
IR 360 Detector
Mounting Method
• The Detector is designed to be mounted on the ceiling
• The back cover has 4 knockouts where the plastic is thinner for ceiling mounting.
• After finishing Detector learning and walk test, proceed to mount the Detector according to instructions below
I.
Break through the 4 knockouts on inside of back cover
II. Use the knockout hoes as template, drill holes in the ceiling, insert wall plug if required.
III. Screw the back cover onto the ceiling according to drilled holes.
IV. The back cover has numbers on the insides to mark the mounting hole number, which corresponds to the mounting hook
number on the back of main body. Align the mounting hole with the mounting hook when installing. Refer to figure below
for mounting hook and hole location.
V. Install the Detector main body onto the back cover. Fit the hooks on the back cover to the mounting holes on Detector main body.
VI. Rotate the Detector main body clockwise to lock the hooks into the mounting hole. Refer to figure below.
VII. Detector mounting is now complete.
PIR Main Body Rear View
Back Cover Inside View
