3
NookBox
Installation Guide
IR 360 Detector
Identifying the parts
1. Test Button aka LED indicator
The test button and also doubles as the LED indicator. The test button is used for
testing the radio performance and for learning purpose. The LED indicator is used
to indicate the status of system.
2. IR Sensor
3. Sensitivity Increaser Jumper Switch (JP3)
It is a 2-pin jumper switch.
4. Tamper Switch
The Tamper switch protects the Detector from removal from mounted location.
5. Battery Compartment
1 CR123A lithium 3V battery
6. Mounting Holes
7. Hooks
8. Ceiling Mounting Knockouts (Inside)
Jumper On
If the jumper is ON, the PIR’s
detection sensitivity is high.
Jumper Off
If the jumper is OFF (if the jumper link is removed
or “
parked
” on one pin), the the PIR’s detection
sensitivity is in normal level. (
Factory default
)
PIR Main Body
Back Cover
