6
NookBox
Installation Guide
Siren Outdoor
Getting Started
Learning
Step 1: Release the bottom screw of the Bellbox using a Philips screwdriver and remove the top cover.
Step 2: Put the Control Panel into learning mode (refer to Control Panel’s user manual for details).
Step 3: Slide the battery switch to ON position to power on the siren. All LEDs will flash once and the buzzer will emit 1 beep.
Step 4: Press the Learn button once. The Bellbox will emit a short beep and LED 1 & 3 will turn on briefly.
The Bellbox is now in learning mode and will transmit a learning code to the Control Panel.
Step 5: If the Control Panel did not receive a learning code, press the learn button again (the Bellbox will not sound a beep this time).
Step 6: If the Control Panel receives the learning code, it will list the device information accordingly, follow Control Panel manual instruction
to complete the learning procedure. An acknowledgement will be sent to the siren. When the acknowledgment is received, the
Bellbox will sound a short beep and flash LED 2 once to indicate that learning process is successful. The siren will then leave
learning mode.
Step 7: Refer to the Control Panel manual and use Edit Device function to check Bellbox settings. You can edit the operation area,
zone number, and device name for the siren.
<NOTE>
If the learning process fails, please remove the siren from the Control Panel and repeat Steps 4-7 again.
If the siren does not receive the confirm code from the Control Panel within one minute, the Bellbox will leave learning mode.
Restart learning process from Step 4.
Edit Siren Operation Area
Follow instruction below to change siren Operation Area in the Control Panel.
Step 1: Use the panel Edit Device function to change siren area setting.
Step 2: Press the learn button on the siren to send signal to panel, the Bellbox will emit a beep and flash LED 1 & 3 once.
Step 3: When the siren receives acknowledgement signal from panel, it will emit a beep and flash LED 2 once to indicate the setting
has been updated. The siren will return to normal operation.
