©nomics s.a. All rights reserved
MU_Brizzy
+
_NS26_REV 1_EN /09-2019
15/57
The opposite symbol “PHT” accompanies the nasal cannulas if they contain
phthalates..
Exposure to phthalates is in most cases not problematic: the doses to which
individuals are exposed are low. As part of the use of Brizzy
+
, exposure to
phthalates is very low since it occurs via pulmonary inhalation during a
relatively short period of time (a few hours at the most). However, due to the
adverse effect that some phthalates have on reproduction and/or fertility, it
is recommended to use phthalate-free cannulas when the device is installed
on children or on pregnant or nursing women.
INSTALLATION OF THE OXYMETRY SENSOR
Installation of the sensor is illustrated in the documents accompanying the sensor. It is
recommended to run the sensor cable along the arm under the pyjama top. The finger on
which the oximetry sensor is placed must be free of coloured nail varnish.
The 8000J and 8000SM SpO2 sensors from Nonin are reusable. Consult their directions for
use.
CONNECTIONS
Connections
Mandibular lowering sensor plug into the black input symbolized by the
opposite pictogram.
The oxymeter module plug into the white input symbolized by the
opposite pictogram.
The auxiliary flow sensor is connected to the red input symbolized by the
pictogram opposite
Install (screw) the nasal cannula on the tip of the flow sensor intended
for pressure measurement
Summary of Contents for Brizzy+
Page 2: ......