ATTENTION!!!
-
Make sure that the system has been assembled properly by pulling up and down the
visor.
-
Scratched visors and inner visors can cause reduced visibility and must therefore be
changed.
2 DISASSEMBLY
2.1 Remove the visor equipped with inner visor.
2.2 Widen the visor: the inner visor will come off automatically.
• WIND PROTECTOR / BREATH DEFLECTOR
Under certain conditions of use, helmet performance can be improved by using these
accessories.
The Wind Protector prevents annoying infiltration of air under the chin area (see Fig. 9 for
assembling and disassembling).
The Breath Deflector prevents the formation of condensation on the visor by-passing the
air flow downwards (see Fig. 10 for assembly and disassembly).
Note:
The wind protector and breath deflector accessories can be easily removed. You
can check the correct assembling of these accessories by pulling them gently towards the
inside of the helmet with your thumb and forefinger. If they move, repeat the assembling
operations.
13
