4
While charging, the LED on the battery life indicator will blink in red. When charging
is completed (maximum 4 hours) the LED on the battery indicator will light up solid
green.
It is normal for the charging adaptor and the battery compartment to heat up during
charging.
There is no harm in leaving the device in the charging station once it is fully charged or removing it
from the charging station and using it without waiting for full charge.
WARNING!
Keep the battery charging pins located on the device and the charging station clean to
ensure proper electrical contact.
NOTE: If the rechargeable Ni-MH batteries are not used for a long time, they may not be charged again.
Therefore, we recommend you to charge them once a month even if you are not going the use them.
Connecting Multiple Charging Stations
When charging multiple devices, you may connect the charging stations together.
For NMS20:
1. Insert the 3 charging station connection pins supplied with the device on one station as shown in
the below picture.
2. Align the other station with the pins and slide it down to snap it into its place.
1
2
NMS20
BATTERY INFORMATION
Summary of Contents for MAKRO NMS20
Page 1: ...NMS20 NMS30 Hand Held Metal Detector USER MANUAL...
Page 2: ......
Page 16: ...www noktadetectors com...