background image

For Consumers within the European Union: Do not dispose 

of this equipment in general household waste. The crossed 

wheeled bin symbol on this equipment indicates this unit 

should not be disposed of in general household waste, but 

recycled in compliance with local government regulations 

and environmental requirements.

FCC STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the following two conditions: (1) this device may not 

cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause 

undesired operation.

Thank you for choosing and purchasing the NMS20/NMS30 Hand Held Metal Detector.

NMS20/NMS30 is a hand-held metal detector designed to find all kinds of ferrous and 

non-ferrous metals carried on a person or inside a non-metal object.

    

WARNINGS!

 

NMS20/30

 is a state-of-the-art electronic device. Do not operate the device before reading the 

user manual.

 Do not store the device under extremely low or high temperatures for extended periods. (Storage 

Temperature: - 40°C to 80°C / - 40°F to 185°F)

 The device is waterproof up to 1 meter (3ft.) and thus is protected for use in the rain and against 

liquid spills 

(does not apply to the versions with earphone jack)

.

 Wipe the device with a damp, soft, non-scratch cloth. Do not use any cleaning products that contain 

chemicals!

 Always keep the device off when not in use. This will help increase battery life.

► 

Protect the detector against impacts during normal use. For shipping, carefully place detector in 

original carton and secure with shock resistant packaging.

 

NMS20/30

 metal detector may only be disassembled and repaired by 

Nokta Makro Authorized 

Service Centers

. Unauthorized disassembly/intrusion into the metal detector control housing for any 

reason voids the warranty.

 Remove the batteries when the unit will not be used for extended periods of time in order to avoid 

damage to the thermometer resulting from battery leakage, heat generation or bursting. 

► 

It is the operator's responsibility to set the appropriate level of security/sensitivity for his/her 

application. In addition, it is also the operator's responsibility to calibrate the device using test pieces 

appropriate for the security/sensitivity level selected.

Nokta Makro is not responsible for any direct or indirect harm caused by the misusage of the device.

INTRODUCTION

Summary of Contents for MAKRO NMS20

















Reviews: