1 Select
Menu
>
Settings
and
Connectivity
>
Destinations
.
2 Open the access point group that has the desired WLAN access point, and select the
access point.
You can also define 802.1x or WPA/WPA2 settings when creating a new WLAN access
point.
3 Select
WLAN security mode
>
WPA/WPA2
or
802.1x
.
4 Select
WLAN security settings
>
WPA/WPA2
>
EAP
to use an extensible
authentication protocol (EAP) plug-in, or
Pre-shared key
to use a password. The
same password must be entered on the WLAN access point device.
If you selected
EAP
, define the EAP plug-in settings according to the instructions
from your service provider.
Connections in WPA2 only mode are applicable to WPA2 enabled devices only.
The available options may vary.
Advanced WLAN settings
1 Select
Menu
>
Settings
and
Connectivity
>
Destinations
.
2 Open the access point group that has the desired WLAN access point, and select the
WLAN access point.
You can also define advanced WLAN settings when creating a new WLAN access
point.
3 Select
Options
>
Advanced settings
, and define the following:
IPv4 settings
— Enter the IP address of your device, the subnet IP address, the default
gateway, and the IP addresses of the primary and secondary DNS servers. For these
addresses, contact your internet service provider.
IPv6 settings
— Define the type of DNS address.
Ad-hoc channel
(only for
Ad-hoc
) — To enter a channel number (1-11) manually, select
User defined
.
Proxy server address
— Enter the address for the proxy server.
Proxy port number
— Enter the proxy port number.
The available options may vary.
View your active data connections
Select
Menu
>
Settings
and
Connectivity
>
Connection mgr.
.
In the active data connections view, you can see your data connections:
data calls
packet data connections
98 Connectivity
© 2009 Nokia. All rights reserved.
98