Installing the Nokia Secure Access System Gateway
18
Nokia Secure Access System Getting Started Guide
4.
From the Voyager Configuration page, select Manage Installed Packages.
The Manage Packages page opens.
5.
From the Manage Packages page, select FTP and Install Packages.
The FTP Packages page opens.
6.
In the text boxes, provide the hostname or IP address of the FTP server and the directory
path on that server (optional).
Also, provide the username and the password for your account on the FTP server.
7.
Click Apply.
The FTP Packages page refreshes. A list of packages (.tgz files) found on the FTP server
appears in the Site Listing panel.
8.
Select the nsas_3_0_0_<timestamp>.tgz file.
9.
Click Apply.
The package is downloaded to the appliance.
10.
Continue installing the Nokia Secure Access System package beginning with
step 4
of
“To
install or upgrade the package with Nokia Network Voyager.”
Installing or Upgrading the Package with Nokia Network
Voyager
This section describes how to install the package by using Nokia Network Voyager.
Table 2
shows, by version number, which directory the package installs to on the appliance. These are
some of the previous Nokia Secure Access System versions and their corresponding directory
locations.
During the package upgrade, the new version of Nokia Secure Access System automatically
imports the configuration from the previous package version. Once the package upgrade
completes, the previous version of the package is deactivated (but not deleted), and the new
package is activated
.
When you upgrade the package, the old package configuration is maintained.
Table 2 Package Version and Directory
Version
Directory
3.0
/opt/nsas-3.0.0
2.1
/opt/nsas-2.1.0
2.0
/opt/nsas-2.0.0
1.2
/opt/nsas-1.2.0
1.1
/opt/nsas-1.1.0