NHM–7
Service Software & Concepts
PAMS Technical Documentation
Page 3
Issue 1 10/2001
Nokia Corporation
Service Software
Phoenix
Phoenix is the next generation Service Software. It has been designed to
meet the challenges in servicing modern cellular phone technology.
The Phoenix program has been built using component architecture. This
means that the actual program is small and most of the program’s func-
tionality is divided into dynamically loaded modules (DLLs).
Supported Operating Systems
Windows 95, 98, 2000, ME and NT 4.0 (SP4).
Hardware requirements for using Phoenix
Minimum:
Processor 233 MHz, RAM memory 64 MB, Disk space 50–100 MB.
Recommended for Windows 2000:
Processor 700 MHz, RAM memory 512 MB, Disk space 50–100 MB.
Introduction
This section briefly describes how to install the Phoenix software and in-
cludes some basic information on how to use the program. For more de-
tailed information, please refer to Phoenix’s Help –files. Each feature in
Phoenix has its own Help function, which can be activated while running
the program.
Press the
F1 key or the feature’s Help–button to activate a Help –file.
Installing Phoenix
1. Download the latest release. Please contact your regional After Market
Services point for information on where to download the latest release.
Download and read the release notes, which have useful in-
formation on the software version you are using.
2. Download the latest data packages for the products you will be using.
3. Before you start installing the program, check that
– the dongle is attached to parallel port. Contact your supervi-
sor in order to obtain a suitable dongle.
– you have administrator rights (Windows 2000 or NT only).
This is required in order to be able to install Phoenix.
4. Install Phoenix by executing the Phoenix installation package and fol-
low the instructions on the screen.
Program files are stored under ”
C:\Program Files\Nokia\Phoe-
nix” (default).
Summary of Contents for NHM-7 series
Page 212: ......