Nokia NHM-7 series Service Manual Download

Page: 117 / 212

NHM–7

Disassembly Instructions

PAMS Technical Documentation

Page 5

Issue 1 10/2001

Nokia Corporation

Remove the 6 screws.

Drive size is torx plus 6.
Tightening torque is 17 Ncm.
Fastening order in the picture, reverse
in disassembly.

In assembly check that PCB is not bent.

Note! Screws contain thread lock-
ing compound. Used screws must
be scrapped and not used again.

Remove UI module.

1. Use plastic tweezers or similar
tool to gently press the UI module
locking snap.

Note locking snaps when assem-
bling UI.

2. Carefully lift up the UI module.

UI handling precautions!

Do not damage the following
items when handling the UI
module:

1. Speaker spring contacts.
2. LCD driver.
3. LCD contact pads.
4. UI PWB contact pads.
5. UI frame metal coating.

Summary of Contents for NHM-7 series





















































































































































































































Search results

Summary of Contents for NHM-7 series

Reviews:

Related manuals for NHM-7 series

Brands by name

Popular brands

Nokia NHM-7 series, Service Manual

Search results

Summary of Contents for NHM-7 series

Reviews:

Related manuals for NHM-7 series

Brands by name

Popular brands