Nokia N73 - Smartphone 42 MB, User Manual, Page: 103 / 265

Settings
102
Configurations
You may receive trusted server settings from your service
provider in a configuration message, or the settings may be
stored on your (U)SIM card. You can save these settings to
your device, view, or delete them in
Configs.
SIP settings
SIP (Session Initiation Protocol) settings are needed for certain
network services using SIP. You may receive the settings in a
special text message from your service provider. You can view,
delete, or create these setting profiles in
SIP settings .
Data call
The data call settings affect all access points using a GSM
data call connection.
Online time —Set the data calls to disconnect
automatically after a time-out if there is no activity.
To enter a time-out, select
User defined , and enter the
time in minutes. If you select Unlimited , data calls are
not disconnected automatically.
Date and time
See "Clock settings," p. 50, and language settings in
"General," p. 98.
Security
Phone and SIM
PIN code request —When active, the code is requested each
time the device is switched on. Deactivating the personal
identification number (PIN) code request may not be allowed
by some SIM cards. See "Glossary of PIN and lock codes,"
p. 103.
PIN code , PIN2 code , and Lock code —You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from
0 to 9 . If you forget any of these
codes, contact your service provider. See "Glossary of PIN
and lock codes," p. 103.
Avoid using access codes similar to the emergency numbers
to prevent accidental dialing of the emergency number.
Autolock period —You can set an autolock period, a time-out
after which the device automatically locks. To turn off the
autolock period, select
None .
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press . A list
of commands opens. Select Lock phone .