Nokia N Series, User Manual

Page: 93 / 301

Make calls
92
Make calls
Voice calls
1 In the standby mode, enter the phone number, including
the area code. To remove a number, press
.
For international calls, press twice for the + character
(replaces the international access code), and enter the
country code, area code (omit the leading zero if
necessary), and phone number.
2 Press to call the number.
3 Press to end the call (or to cancel the call attempt).
Pressing
always ends a call, even if another application
is active. Closing the slide does not end an active voice call.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to
Mute , select Unmute first.
To make a call from Contacts , press , and select
Contacts . Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
.
You must copy the contacts from your SIM card to Contacts
before you can make a call this way. See “Copy contacts,”
p. 102.
To call a recently dialed number in the standby mode,
press
. Scroll to the number, and press .
To send an image or a video clip in a multimedia message
to the other participant of the call, select
Options > Send
MMS (in UMTS networks only). You can edit the message
and change the recipient before sending. Press to send
the file to a compatible device (network service).
To put an active voice call on hold while answering another
incoming call, select
Options > Hold . To switch between
the active and the held call, select Options > Swap . To
connect the active and held calls and drop yourself from
the line, select
Options > Transfer .
To send touch tone strings (for example, a password), select
Options > Send touch tones . Enter the touch tone string
or search for it in Contacts . To enter a wait character ( w )
or a pause character ( p ), press repeatedly. Select OK to
send the tone. You can add touch tones to the Phone number
or Touch tones fields in a contact card.
Tip! When you have only one active voice call, to put
the call on hold, press . To activate the call, press
again.
During an active call, to route the sound from the handset to
the loudspeaker, select
Options > Activate loudspeaker .