Nokia N Series, User Manual

Page: 121 / 301

Settings
120
Cell info display —Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info reception.
Connection
To edit access point and other connection settings, press ,
and select Tools > Settings > Connection > Bluetooth , USB ,
Access points , Packet data , Wireless LAN , SIP settings ,
Internet tel. , Configurations , or APN control .
For Bluetooth connectivity settings, see “Settings,” p. 28.
For USB data cable settings, see “USB,” p. 31.
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
You can also use a wireless LAN data connection. See
“Wireless LAN,” p. 25. Only one connection in one wireless
LAN can be active at a time, but several applications can
use the same internet access point.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive
multimedia messages.
• Internet access point (IAP) to send and receive e-mail
and connect to the internet.
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
Access points
You may receive access point settings in a message from a
service provider. See “Data and settings,” p. 85. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them.
indicates a protected access point.
indicates a packet data access point, and a wireless
LAN access point.
Tip! You can create internet access points in a
wireless LAN with the WLAN wizard. See “WLAN
wizard,” p. 26.
To create a new access point, select Options > New
access point .
To edit the settings of an access point, select Options >
Edit . Follow the instructions from your service provider.
Connection name —Enter a descriptive name for
the connection.