Nokia IP40 - Satellite Unlimited - Security Appliance, User Manual

Page: 57 / 244

Nokia IP40 Security Platform User’s Guide v1.1 57
4
Accessing Nokia IP40 Security Platform
This chapter discusses the methods for accessing and configuring the Nokia IP40 Security
Platform. This chapter also provides an introduction to centrally managing large scale
deployments of the IP40 by using Nokia Horizon Manager, SmartCenter Large Scale Manager,
and Sofaware Security Management Portal.
The main topics for this chapter include:
„
Connection Methods
„
Configuration Methods
„
Connecting Nokia IP40 Security Platform to a Computer by Using the Console Port
„
Using Telnet to Connect to Nokia IP40 Security Platform
„
Enabling and Disabling Telnet Access to Nokia IP40
„
Accessing Nokia IP40 with HTTP and HTTPS
„
Managing Large Scale Deployments of Nokia IP40
Connection Methods
You can connect to your Nokia IP40 Security Platform locally through LAN, WAN, DMZ, or
console ports for Inband management. You can also connect from a remote location by using
modem dial-in for out-of-band management (OOB).
For information about how to use OOB to configure your device, see
“Configuring Nokia IP40
Through Out-of-Band Management” on page 137.
Typically the WAN port for your device is connected to your Internet service provider (ISP),
while the LAN port is connected to your computer, or to a hub, if you are using IP40 between
your computer network and the outside world. You can connect your computer to the console
port of your IP40 to manage the device by using the command-line interface (CLI).